Trumpf - TruTool TF 350 Li-ion Rechargeable Battery 18 volt Power Fastener joins metal parts using cold forming, without screws or rivets. Battery powered tool is perfect for field use, where mains power is not available. Punch and die create a dimple in the metal to create a secure connection. Simple, single stroke activation with consistent strength and connection quality. Creates up to 120 joining points per minute. TF 350 can join coated and un-coated materials. Various punch and die arms allow to make a joining dimple up or down. The TruTool TF 350 joins overall material thicknesses of 0.8 mm to max. 4 mm. The result is a long-lasting connection in one operation, without additional hardware. This power fastener is perfect for manufacturing HVAC ducts. Up to three parts can be connected together, even with various sheet thickness. Use with coated sheet metal, mild steel, stainless steel, aluminum, or with intermediate layers of adhesives or plastic sheets.
Set includes: TF 350 Power Fastener, 1884902 punch, 0128748 tilting arm, 0118132 3.1-3.5mm fixed die arm, 0053649 stripper for straight sheets, 0112929 stripper for channels various accessory wrenches & lubricants; in plastic case. 5-year warranty (must register tool with Trumpf, within 30 days of purchase).

TruTool TF 350 LiHD 18V rechargeable battery
MAXIMUM SHEET THICKNESSES:
STEEL 400 N/MM² 3.5 mm
STEEL 600 N/MM² 2.5 mm
ALUMINUM UP TO 250 N/MM² 4 mm
GENERAL:
MINIMUM SHEET THICKNESS 0.8 mm
MAXIMUM JOINING FORCE 25 kN
MAXIMUM STROKE RATE 2 1/s
MINIMUM EDGE SPACING 8 mm
MAXIMUM EDGE SPACING 58 mm
MAXIMUM FLANGE HEIGHT (B) 36 mm
VOLTAGE 18 V
WEIGHT:
WEIGHT (WITH 4 AH RECHARGEABLE BATTERY) 8 kg