Trumpf - TruTool S 450 Shear is designed for heavy-duty tasks. It is equipped with a robust cutting table specifically designed for thick metal sheets, with thicknesses up to 0.177 in. Above all, the machine is particularly well-suited for processing stainless steel up to 0.1 in. You can cut radii starting from 1.37 in without force. With a working speed of 19.5 feet per minute, you can progress quickly with your work. This is particularly advantageous when processing large sheets or metal coils. The cutters can be adjusted quickly and easily to the sheet thickness using a rotary knob. Set includes: S 450 shear, integrated cutter, accessory wrenches; in plastic case.

Particularly powerful in thick sheets
Powerful 1400 W motor with a cutting table specifically designed for thick sheet.

Adjustment without the need for tools
Cutter height adjustment enables individual adaptation to the sheet thickness.

Extremely user-friendly
The bow-handle, for one-hand and two-hand operation, ensures reliable machine control.

Long service life
The cutters each have two cutting edges and can be used either at the top or bottom. If the cutting performance decreases, you can rotate the cutter by 180° and continue working with a new cutting edge.

TruTool S 450
MAXIMUM SHEET THICKNESSES
STEEL 400 N/MM² 4.5 mm
STEEL 600 N/MM² 3.5 mm
STEEL 800 N/MM² 2.5 mm
ALUMINUM UP TO 250 N/MM² 5 mm
RADII: SMALLEST RADIUS R 35 / L 25 mm
GENERAL:
WORKING SPEED 4 m/min - 6 m/min
STROKE RATE AT NOMINAL LOAD 1800 RPM /min
STARTING HOLE DIAMETER 75 mm
NOMINAL INPUT POWER 1700 W
WEIGHT:
WEIGHT WITHOUT CABLE 6.2 kg